Xtreme Bilge heaters Suitable for boats up to 24' Length and Small RV compartments 

• True Forced Air Heating circulates air more effectively and heats more evenly for more accurate climate control.
• Automatic Thermostat turns the heater on at 40°F and off at 55°F +/-3° - the tightest tolerance available.
• Failsafe Design cannot overheat. Heating technology is dynamic and self-regulating.
• High Efficiency Xtreme produces heat faster, circulates more air and shuts off earlier.
• Pre-wired 15ft marine rated power cord with 110V 3 prong plug eases installation.
• Maximum Life - Designed for durability and reliability.
• Complete Protection: Fully anodized inside and out.
• Small Footprint
• Certified and Independently Tested now with the UL 1278 standard

Our mission in creating the Xtreme Heater was to build the safest, most reliable and efficient product available. Our heaters are the safe and easy answer to keeping you on the water longer.

Specifications 

• Wattage: 400W
• BTU: 1365
• Inrush (startup) current 8.2 A, 1 sec.
• Typical operating current is 4. A
• Fan flow 40CFM
• Heater Dimensions: 5.75″ x 3.5″ x 5 1/8″
• Box packaged Dimensions 10″ x 6″ x 6″
• Fuse size required 15A
• 15ft marine rated power cord
• UPC-895670001217

Suitable for boats up to 24′ Length

 Xtreme Heaters bilge heater Suitable for boats up to 35′ Length and RV large size compartments

• True Forced Air Heating circulates air more effectively and heats more evenly for more accurate climate control.
• Automatic Thermostat turns the heater on at 40°F and off at 55°F +/-3° – the tightest tolerance available.
• Failsafe Design cannot overheat. Heating technology is dynamic and self-regulating.
• High-Efficiency Xtreme produces heat faster, circulates more air and shuts off earlier.
• Pre-wired 15ft marine rated power cord with 110V 3 prong plug eases installation.
• Maximum Life – Designed for durability and reliability.
• Complete Protection: Fully anodized inside and out.
• Small Footprint
• Certified and Independently Tested now with the UL 1278 standard 

Our mission in creating the Xtreme Heater was to build the safest, most reliable and efficient product available. Our boat heaters are the safe and easy answer to keeping you on the water longer.

Specifications

• Wattage: 800W
• BTU: 2729.7
• Inrush (startup) current 14A, 1 sec.
• Typical operating current is 6.5A
• Fan flow 40CFM
• Heater Dimensions: 8″ x 3.5″ x 5 1/8″
• Box packaged Dimensions 12″ x 6″ x 6″
• Fuse size required 20A
  
• 15ft marine rated power cord
• UPC-895670001262

Suitable for boats up to 35′ Length

Bilge heaters Suitable for boats up to 35′ Length

• True Forced Air Heating circulates air more effectively and heats more evenly for more accurate climate control.
• Automatic Thermostat turns the heater on at 40°F and off at 55°F +/-3° – the tightest tolerance available.
• Failsafe Design cannot overheat. Heating technology is dynamic and self-regulating.
• High-Efficiency Xtreme produces heat faster, circulates more air and shuts off earlier.
• Pre-wired 15ft marine rated power cord with 110V 3 prong plug eases installation.
• Maximum Life – Designed for durability and reliability.
• Complete Protection: Fully anodized inside and out.
• Small Footprint
• Certified and Independently Tested now with the UL 1278 standard

Our mission in creating the Xtreme Heater was to build the safest, most reliable and efficient product available. Our heaters are the safe and easy answer to keeping you on the water longer.

Specifications

• Wattage: 800W
• BTU: 2729.7
• Inrush (startup) current 14A, 1 sec.
• Typical operating current is 6.5A
• Fan flow 40CFM
• Heater Dimensions: 8″ x 3.5″ x 5 1/8″
• Box packaged Dimensions 12″ x 6″ x 6″
• Fuse size required 20A
  
• 15ft marine rated power cord
• UPC-895670001262

Suitable for boats up to 35′ Length

Designed for use with the Small400 Xtreme Heater 

Installation & removal of your boat heater is now fast and easy.

Driven by customer demand, our quick release bracket was designed specifically for your Xtreme Heaters bilge heater , and allows you to easily install and remove your heater(s) in seconds, without the need for tools.

Using this bracket, your mounting options open up to include locations you may not have considered due to concern for blocked access to other components in your tight engine space. 

For our customers that prefer to leave their heater(s) in place only during the winter months, this is the accessory you’ve been asking for.

The quick release bracket makes it simple to remove the heater for the boating season, leaving just the low-profile bracket installed and ready to go. When winter returns, just lock it down, and plug it in!

• Built Xtreme Tough, anodized aluminum construction will not corrode
• Provides easy off-season storage, for quick access to engine spaces
• Works on ALL Xtreme Heaters built after 2004
• Quickly Install and Remove your Heater Without Tools!
• One Year Warranty

Specifications 

• Two size options: One fits Xtreme Heaters manufactured from 2004-2021, and the other fits 2022+
• Anodized Aluminum Construction

For our customers that prefer to leave their heater(s) in place only during the winter months, this is the accessory you’ve been asking for.

Designed for use with the Medium600w and Large800w Xtreme Heater 

Installation & removal of your boat heater is now fast and easy.

Driven by customer demand, our quick release bracket was designed specifically for your Xtreme Heaters bilge heater , and allows you to easily install and remove your heater(s) in seconds, without the need for tools.

Using this bracket, your mounting options open up to include locations you may not have considered due to concern for blocked access to other components in your tight engine space. 

For our customers that prefer to leave their heater(s) in place only during the winter months, this is the accessory you’ve been asking for.

The quick release bracket makes it simple to remove the heater for the boating season, leaving just the low-profile bracket installed and ready to go. When winter returns, just lock it down, and plug it in!

• Built Xtreme Tough, anodized aluminum construction will not corrode
• Provides easy off-season storage, for quick access to engine spaces
• Works on ALL Xtreme Heaters built after 2004
• Quickly Install and Remove your Heater Without Tools!
• One Year Warranty

Specifications 

• Two size options: One fits Xtreme Heaters manufactured from 2004-2021, and the other fits 2022+
• Anodized Aluminum Construction

For our customers that prefer to leave their heater(s) in place only during the winter months, this is the accessory you’ve been asking for.

Visit routeapp.io to learn more.

Pigtail Shore Power 30A to 15A Dogbone Adapter Power Cord Twist Lock L5-30P Male to 5-15R Female with LED 

Heavy Duty Over Molded Construction

• Custom Grip for Comfort
• Marine Quality
• 5-Year Warranty
• Led indicator

Specifications 

Female Connector:

• 15/250A 125V Straight Blade
• Attaches to cordset or boat inlet

Male Plug:

• 30A 125V Locking
• Attaches to Dockside receptacle / cordset

30A 125V Male to 15A 125V Female

Heavy Duty Over Molded Construction

• Custom Grip for Comfort
• Marine Quality
• 5-Year Warranty

 Specifications 

Female Connector:

• 15/250A 125V Straight Blade
• Attaches to cordset or boat inlet

Male Plug:

• 30A 125V Locking
• Attaches to Dockside receptacle / cordset

A handy solution to connect a 30A shore power plug to a 15A household plug

Straight Adapter has an ergonomic design making it easy to grip. This adapter allows you to plug in your 30A shore power cord into a household outlet. A power indicator light lets you know that power is flowing through the connection. Designed to provide a temporary power solution for your boat.

Key Features

• Use only in an enclosed, dry location, such as powering your boat from a 15A power receptacle inside your garage
• Female connector attaches to boat inlet or cord set
• Male plug attaches to dockside receptacle or household outlet
• They do not have sealing collars and are not recommended for use in wet locations
• Ergonomic design for easy grip
• LED power indicator light
• Five-year warranty

Specifications

• Connections: NEMA L5-30R female twist-lock to 5-15P male straight blade
• Amperage: 15A
• Voltage: 125V
• Material: PVC jacket
• UPC 895670001200

To test the functionality of the heater just spray on the test area of your heater to turn it on.

The economical, general purpose freeze spray with a wide spray for cooling. We recommend testing upon installation and then 4 times a year.

• Rapidly Cool an Area to –60°F/–51°C
• Wide Spray for Cooling Large Areas Immediately
• Safe on Plastics
• Non-flammable
• CFC/HCFC Free, Ozone Safe

Specifications 

• UPC-895670001248
• Ships UPS ground only
• Test your heater
• Refrigerant Spray
• 3.5 oz can

• Simulates cold air

Small, quiet, portable heater for marine and RVs

• Built-in overheat protection
• “One Shot” secondary overheat protection
• Two heat settings: 750/1500 Watts
• Freeze prevention thermostat setting
• Fan-only setting
• Automatic thermostat
• 6 foot power cord
• Color: white/black
• UL Listed to UL 1278 standards 

NOT FOR USE IN ENGINE SPACES OR OTHER AREAS THAT MAY CONTAIN EXPLOSIVE FUMES, WATER OR HIGH LEVELS OF MOISTURE (CONDENSING).

The Xtreme Boat and Cabin heater is designed to help keep your boat cabin, RV or other small space comfortable during the fall and winter months. This heater features quiet operation, a low profile and stable base that prevents tipping. Drawing air from the top, this heater can be placed up against walls, or on carpeted surfaces without blocking the air intake. The 1500 Watt heat setting will quickly warm your living space, while the 750 Watt setting will efficiently maintain comfortable temperatures. The 6 foot, power cord offers more flexibility for heater placement independent of outlet locations. UL listed UL1278

Specifications 

• Wattage: Low: 750 / High: 1500
• Amps: Low: 6.25 / High: 12.5
• Voltage: 120V
• Dimensions: 10″L x 10¼”W x 4¾” H
• Cord Length: 6ft
• Weight: 5lbs
• UPC 895670001224
• UL Listed UL 1278